dick0149 Posted May 2, 2008 Share Posted May 2, 2008 i just bought my 93 sc400 about a year ago and occasionaly either the rpm's, or the speedometer won't work at all sometimes both @ once... any ideas on this guys??? thanks Quote Link to comment Share on other sites More sharing options...
EPIX INC Posted May 3, 2008 Share Posted May 3, 2008 next time one or the other acts up, smack the side of the dash right above the right side of the cluster... see if that makes it work... if so, then what it is, is the metal screws on the back of the cluster. remove the cluster with ignition off, and take a soldering iron to the 5 screws on both sides. they have metal seats under the screws very common problem. just put a drop or two of solder between the screw and the seat. then u should be good. Quote Link to comment Share on other sites More sharing options...
jlasontran Posted May 3, 2008 Share Posted May 3, 2008 next time one or the other acts up, smack the side of the dash right above the right side of the cluster... see if that makes it work... if so, then what it is, is the metal screws on the back of the cluster. remove the cluster with ignition off, and take a soldering iron to the 5 screws on both sides. they have metal seats under the screws very common problem. just put a drop or two of solder between the screw and the seat. then u should be good. Hey there, i was wondering what is a soldering iron? Quote Link to comment Share on other sites More sharing options...
jlasontran Posted May 3, 2008 Share Posted May 3, 2008 nevermind i found out what it is. So you just put some on the screws and the seats right?? Quote Link to comment Share on other sites More sharing options...
EPIX INC Posted May 5, 2008 Share Posted May 5, 2008 yup thats all u gotta do. Quote Link to comment Share on other sites More sharing options...
jlasontran Posted May 6, 2008 Share Posted May 6, 2008 yup thats all u gotta do. can you explain step by step so there wont be any mistakes when im doing it. thank you Quote Link to comment Share on other sites More sharing options...
jlasontran Posted May 6, 2008 Share Posted May 6, 2008 can you explain step by step so there wont be any mistakes when im doing it. thank you Quote Link to comment Share on other sites More sharing options...
dick0149 Posted May 7, 2008 Author Share Posted May 7, 2008 thanks... i'll try that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.