Jump to content


Fuel Presure Regulator Or Fuel Pump Relay Location


blessed

Recommended Posts

91 LS with a new Fuel Pump and still will not start. It cranks over fine, however, it appears to not be getting any fuel. So, I'm guessing I need to check or replace the Fuel Presure Regulator and/or the Fuel Pump Relay. The fuel pump is working fine.

Any ideas on their location?

Thanks and Happy New Year!

Link to comment
Share on other sites

91 LS with a new Fuel Pump and still will not start. It cranks over fine, however, it appears to not be getting any fuel. So, I'm guessing I need to check or replace the Fuel Presure Regulator and/or the Fuel Pump Relay. The fuel pump is working fine.

Any ideas on their location?

Thanks and Happy New Year!

Relay is in the main fuse box in the engine bay, lift the cover and look underneath, sticker will show you which is which I think.

How long have you cranked for? you may need to crank for a 30 second burst, but certainly no more than that or you could overheat the starter windings.

Link to comment
Share on other sites

91 LS with a new Fuel Pump and still will not start. It cranks over fine, however, it appears to not be getting any fuel. So, I'm guessing I need to check or replace the Fuel Presure Regulator and/or the Fuel Pump Relay. The fuel pump is working fine.

Any ideas on their location?

Thanks and Happy New Year!

Relay is in the main fuse box in the engine bay, lift the cover and look underneath, sticker will show you which is which I think.

How long have you cranked for? you may need to crank for a 30 second burst, but certainly no more than that or you could overheat the starter windings.

Thanks! I cranked several times for at least 15 to 20 seconds each. I'll try again today for a bit.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership