Jump to content

Breaking Wheel Studs Alot!


mr_goodwrench_06

Recommended Posts

8 studs

?

are the rims original toyota/lexus ones

do you have the proper nuts?

as they have a special tapered edge that toyota likes to use

that might be the reason they are breaking

go to the dealer and order one and look if there is a difference

Link to comment
Share on other sites

i would say there is more pressure on that side of the car

which usually happens

another question

is are the studs long enough to get a good grip on the rims and nut

sometimes if they are shorter they will cause an increase in pressure near the end of the nut which has a very low threshold for pressure

are you usign spacers at all for the new rims?

Link to comment
Share on other sites

No spacers, but the studs do not go all the way through the lug nut. I sorta thought this was wrong, but that is how I got it. My wife and I saw a set of chrome factory rims on a '98 GS (I think) that I wouldn't mind putting on, if I found a set. Maybe my rims are too thick, and I need longer studs. Any Idea where I could get them? I just keep buying stock Lexus studs.

Thanks,

Bill

Link to comment
Share on other sites

they may have a longer set

the offset is bigger on the new rims causing more of it to be taken up by the rim and not the bolt

it should help relive the pressure

there should be a spacer kit from h and r since you are on one of the most popular bolt patterns

basically has newer longer bolts to go on the rims

but the spacer has flush fit nuts that recess into the spacer

it might work if they make it

and there is room for it under the fender

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership