The Story Of The Bonehead Transmission Mechanic....

[ford212.809]

I changed the fluid/filter for the transmission this morning. Everything went very smooth - easy/messy job.

UNTIL - I was replacing the 17 pan bolts and then - I broke the head off of one of the bolts from tightening it too tight. :chairshot: :chairshot: :chairshot:

I have the head and approximately 3/16 of the bolt in my hand. I will see if it leaks in that spot. Hope not.

[blk_on_blk]

You can always center-drill it and use a small easy out... that should get it out.