Jump to content


98 Gs300 With Starter Issues


Recommended Posts

With increasing frequency, the starter does not engage when turning the key. Lights, radio, etc come on, but nothing else happens. After several tries, the engine cranks right up. We have a new battery & the battery cables are not corroded. (This was a problem in the past.)

Any ideas or suggestions as to the cause and cure for this problem?

Link to comment
Share on other sites

With increasing frequency, the starter does not engage when turning the key. Lights, radio, etc come on, but nothing else happens. After several tries, the engine cranks right up. We have a new battery & the battery cables are not corroded. (This was a problem in the past.)

Any ideas or suggestions as to the cause and cure for this problem?

it seems as though you just need to replace the starter.

Link to comment
Share on other sites

With increasing frequency, the starter does not engage when turning the key. Lights, radio, etc come on, but nothing else happens. After several tries, the engine cranks right up. We have a new battery & the battery cables are not corroded. (This was a problem in the past.)

Any ideas or suggestions as to the cause and cure for this problem?

it seems as though you just need to replace the starter.

Replace the starter contacts, Around $100.00 OTD.............

Link to comment
Share on other sites

Yes I was going to say starter contacts as well. You may want to check the teeth on both the starter gear and flex plate since its not engaging perfectly all the time. Hopefully they are all in good condition. Better to check with the starter out than have a bigger headache later on.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership