darkgable143 Posted December 21, 2006 Share Posted December 21, 2006 :chairshot: THE STEERING WHEEL WON'T GO UP AND DOWN WHEN I USE THE SWICTH ON THE COLUM. IT WILL GO IN AND OUT. I DON'T THINK IT'S ON ANOTHER FUSE. DOES ANYBODY HAVE A CLUE AS TO WHAT CAUSES THIS? Quote Link to comment Share on other sites More sharing options...
Smartazz91 Posted December 23, 2006 Share Posted December 23, 2006 I had the same problem. The fix was very simple. If I remember corectly, all I used was a long phillips screwdriver & a rubber washer. The kind that goes in the end of a garden hose. This should take you to the thread on this site. http://us.lexusownersclub.com/forums/index...ic=4237&hl= Quote Link to comment Share on other sites More sharing options...
Micah Posted December 26, 2006 Share Posted December 26, 2006 I did the same thing but with a metal washer from true value hardware. That is a good article and should work as long as the motor didn't give out. Do you hear the motor running when you try to move it up and down? If you do, this should work. Its a common problem and the gear gets out of sync with the screw attached to the motor causing them not to connect. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.