Jump to content

Recommended Posts

Posted

Hi,

I just got a 97 Es 300, with 172k on it, the car drove fine for 3000 miles, and one day after i fixed an exhaust leak, the car idle at 2000 rpm, when the car is warm,,,,, however in the morning when the car is cold, it is at 800 rpm,,,, and start climbing up as the car is warming up,,,,, at normal operating temperature

the car is idling high,,,, Pretty much is working the opposite..

i read previous post, and i cleaned the throttle body....checked the cooling sensor,

it is driving me nuts, any idea guys what to check next????????

thanks

Posted

when you say cooling sensor do you mean the MAF sensor??

did you rest ECU afterwards?

Posted

when you say cooling sensor do you mean the MAF sensor??

did you rest ECU afterwards?

the one that comes from the lower radiator hose...... I did take the relay out for a min and put it back .

Posted

I just had the check engine light on,,,,,i have 2 codes.... P0120 and P0505,

Posted

I cleaned the IAC, after i installed it the car drove fine for 1 day, the next day when start it up in the morning it revved at 1800 and stayed there, I dont know it acts weird one day i have check engine the next i dont.

Posted

P0120

TP Position Sensor/Switch ‘‘A’’ Circuit Malfunction

P0505

Idle Control System Malfunction

You have either a bad wire or a bad TP .

Posted

i vote for a bad tp sensor...i changed 2 of them in the last 2 weeks.

sk,

have you had luck cleaning the IAC's?

i tried on a couple a long time ago with no luck. now i just replace them. i'd hate to clean one and have a customer come back with it not working. in fact i have a 01 sienna coming in monday for a iac replacement.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...

Forums


News


Membership


  • Unread Content
  • Members Gallery