Dr.Gee Posted June 1, 2006 Share Posted June 1, 2006 How do you reset the maintence light? Quote Link to comment Share on other sites More sharing options...
Statman Posted June 1, 2006 Share Posted June 1, 2006 How do you reset the maintence light? This is how I did it on my old GX: First make sure Odometer is on ODO. While car is off, hold Odometer button in and switch car ignition to A/C. When flashing maintenance light goes solid release. Quote Link to comment Share on other sites More sharing options...
flukechance Posted June 7, 2006 Share Posted June 7, 2006 Thank you so much. I hope this works. This is exactly why I logged on today!!! Quote Link to comment Share on other sites More sharing options...
steviej Posted June 24, 2006 Share Posted June 24, 2006 try this if it is the reminder light to change your oil and stuff. 1. With your car OFF, place your key in the ignition and turn to "On". Do not start the car. 2. Find the odometer button and press until it reads the total odometer setting, (not the Trip A or Trip B setting). 3. Turn the key to OFF. 4. Place your finger back on the odometer button, press and hold. Then while still holding the button, turn the key back to "On" (not START). 5. Hold the odometer button in until the MAINT REQD light goes out...should take about 8-10 seconds. Good luck, it is pretty much the industry standard of resetting this reminder light. original thread steviej 1 Quote Link to comment Share on other sites More sharing options...
Dr.Gee Posted August 21, 2006 Author Share Posted August 21, 2006 Along the same lines,how do you change the maintenance interval?And,what is the default(3500 mi?) Quote Link to comment Share on other sites More sharing options...
flukechance Posted August 30, 2006 Share Posted August 30, 2006 I asked the dealer about this, and he said that it can not be changed. Might just be a CA law tho. Not sure about the rest of the country. Quote Link to comment Share on other sites More sharing options...
lexus470 Posted July 6, 2007 Share Posted July 6, 2007 Thanks Quote Link to comment Share on other sites More sharing options...
Joe Dallas Posted February 6, 2008 Share Posted February 6, 2008 How do you reset the maintence light? This is how I did it on my old GX: First make sure Odometer is on ODO. While car is off, hold Odometer button in and switch car ignition to A/C. When flashing maintenance light goes solid release. This is great to know. Sam Quote Link to comment Share on other sites More sharing options...
peter_gx470 Posted February 13, 2008 Share Posted February 13, 2008 Along the same lines,how do you change the maintenance interval?And,what is the default(3500 mi?) it come on around 6500 mile and stay on about 7k mile until reset. you can't change it because the computer calulated it by your driving condition. Quote Link to comment Share on other sites More sharing options...
SpauldingSmails Posted May 3, 2008 Share Posted May 3, 2008 Great! Thanks for the tip. M Quote Link to comment Share on other sites More sharing options...
scanboy Posted June 18, 2008 Share Posted June 18, 2008 Thanks! Quote Link to comment Share on other sites More sharing options...
remas1974 Posted July 22, 2008 Share Posted July 22, 2008 Great, thanks! Quote Link to comment Share on other sites More sharing options...
HughDunn Posted September 29, 2009 Share Posted September 29, 2009 Does anyone that has a ES 350 have the answer to how to remove the dealer set Oil Maintenance message between the speedometer and the tach. Several people have given me the odometer button then press on without brake etc. this doesn't work on my car, Any other suggestions that have worked. Quote Link to comment Share on other sites More sharing options...
smooth1 Posted September 29, 2009 Share Posted September 29, 2009 Does anyone that has a ES 350 have the answer to how to remove the dealer set Oil Maintenance message between the speedometer and the tach. Several people have given me the odometer button then press on without brake etc. this doesn't work on my car, Any other suggestions that have worked. Go here:How to's Should be the same. Quote Link to comment Share on other sites More sharing options...
DonZ Posted November 27, 2009 Share Posted November 27, 2009 Along the same lines,how do you change the maintenance interval?And,what is the default(3500 mi?) I just reset my maintenance and the light went out. To change the maintenance interval: - Push info - Maintenance - Push Oil onscreen - type in date and mileage - Km - Push Filter = Same . It worked for me. Quote Link to comment Share on other sites More sharing options...
stephon123 Posted October 20, 2011 Share Posted October 20, 2011 try this if it is the reminder light to change your oil and stuff. 1. With your car OFF, place your key in the ignition and turn to "On". Do not start the car. 2. Find the odometer button and press until it reads the total odometer setting, (not the Trip A or Trip B setting). 3. Turn the key to OFF. 4. Place your finger back on the odometer button, press and hold. Then while still holding the button, turn the key back to "On" (not START). 5. Hold the odometer button in until the MAINT REQD light goes out...should take about 8-10 seconds. Good luck, it is pretty much the industry standard of resetting this reminder light. original thread steviej Thanks for the info, i will try it & see how it works Quote Link to comment Share on other sites More sharing options...
eddieal Posted May 8, 2012 Share Posted May 8, 2012 2006 RX400 H Holding in the ODO/Trip button and turning the key on while continuing to hold the button in worked like a charm. The middle display read "reseting" for about 3 seconds then "reset complete". This saved us a $745 bill from the dealer. I'll change the air filters and check the belts and fluid levels myself. This was also the fix when we went a little too far after the "oil change due" came on. Thanks for the info. :-) Quote Link to comment Share on other sites More sharing options...
arizonadon Posted December 2, 2021 Share Posted December 2, 2021 On 6/24/2006 at 12:52 PM, steviej said: try this if it is the reminder light to change your oil and stuff. 1. With your car OFF, place your key in the ignition and turn to "On". Do not start the car. 2. Find the odometer button and press until it reads the total odometer setting, (not the Trip A or Trip B setting). 3. Turn the key to OFF. 4. Place your finger back on the odometer button, press and hold. Then while still holding the button, turn the key back to "On" (not START). 5. Hold the odometer button in until the MAINT REQD light goes out...should take about 8-10 seconds. Good luck, it is pretty much the industry standard of resetting this reminder light. original thread steviej Thanks stevie, this works Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.