DAZZ Posted September 23, 2005 Share Posted September 23, 2005 I need to replace my door panels driver most important where can I find them or how can i rigg up the ones i already have anyone THANKS Quote Link to comment Share on other sites More sharing options...
lexus082 Posted September 24, 2005 Share Posted September 24, 2005 Luxurymods.com should be able to get you what you need. Here is an appox price break down. The leather arm rest is $230 a side, the door pocket (lower panel) $236 a side. If you need the entire door panel I would recommend a used one. Ebay has some listed every now and then... Dont know if that helps at all but thats what I know off hand b/c I plan to replace what I just mentioned. Quote Link to comment Share on other sites More sharing options...
Mr X Posted October 19, 2005 Share Posted October 19, 2005 I need to replace my door panels driver most important where can I find them or how can i rigg up the ones i already have anyone THANKS ← I have a complete 92 sc400 interior if your interested Quote Link to comment Share on other sites More sharing options...
lexusman400 Posted October 19, 2005 Share Posted October 19, 2005 I need to replace my door panels driver most important where can I find them or how can i rigg up the ones i already have anyone THANKS ← I have a complete 92 sc400 interior if your interested ← How much for the door if they are gray... Quote Link to comment Share on other sites More sharing options...
Silverback Posted October 25, 2005 Share Posted October 25, 2005 I need to replace my door panels driver most important where can I find them or how can i rigg up the ones i already have anyone THANKS ← I have a complete 92 sc400 interior if your interested ← How much for the door if they are gray... ← Anything in tan? Driver side? Quote Link to comment Share on other sites More sharing options...
vettenut72 Posted November 2, 2005 Share Posted November 2, 2005 Do you have a Tan/Dark Brown auto shifter in good shape and what about a steering wheel? That is dark brown. Pricing? Anyone have a good place to redo mine? Joelbbvette@hotmail.com is the best way to get me. thanks, Joel Quote Link to comment Share on other sites More sharing options...
Oconee1985 Posted November 10, 2005 Share Posted November 10, 2005 I chose a cheaper route... The places where my panels screwed in were cracked so much that the screws were useless... What I did was go to home depot and bought a strip of flat aluminum that was about 1in wide and about a 1/4 in thick and 4ft long... I then cut it in strips about 2-3in long and drilled holes in the pieces... Then I screwed the panels down and theyve been in place for six months now and no problems (knock on wood)... Total fix was less than 10 bucks... Hope this helps Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.