es3doubleO Posted September 17, 2005 Share Posted September 17, 2005 Does anybody know how to or have instructions on how to set the timing on a 1992 ES300 (3VZ-FE)?? Quote Link to comment Share on other sites More sharing options...
Toysrme Posted September 17, 2005 Share Posted September 17, 2005 Hmmmm My post got ate up! Drive around the block until the coolant comes up to the normal temp range. Bridge E1 & TE1 in a DIAGNOSTIC port. Connect the ground of the light The inductive pick-up to the #1 spark plug wire Power wire When you point the light at the timing guide, it should rear 10*btdc @ idle. The engine itself is very de-tuned. You can try retarding to 7*btdc, or advancing to 17*btdc in a quest for better throttle responce, and a few hoursepower. Even at 7* of base advance (17*btdc) you shouldn't have to run anything more than 87 pump gas. Quote Link to comment Share on other sites More sharing options...
es3doubleO Posted September 20, 2005 Author Share Posted September 20, 2005 Thanks for all your help Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.