PES300 Posted August 21, 2005 Share Posted August 21, 2005 OK I have replaced the dogbone and will attempt to replace also the front mount. I searched a lot of forums and discovered that I shall need a 17 mm socket and need to jack up the oil pan. Out of the three bolts one has to be removed from underneath and two from the top. Do I need to put the car on a ramp , remove the bolt from underneath first , then put the car back on level, place a jack under the oil pan and remove the other two?. (Oh I forgot that I should remove the center bolt as well) Is there any tip in doing this? What is the torque specification? Are the bolts hard to break loose? appreciate any help Thanks Quote Link to comment Share on other sites More sharing options...
honkand Posted August 23, 2005 Share Posted August 23, 2005 What year of ES300? If it is 93 model then I can pass on the repair manual procedure. DaveH Quote Link to comment Share on other sites More sharing options...
PES300 Posted August 24, 2005 Author Share Posted August 24, 2005 What year of ES300? If it is 93 model then I can pass on the repair manual procedure.DaveH ← Yes it is a 93 es300 v6 appreciate repair manual procedure I wish that you also have the procedure to remove the front exhaust pipe Thnaks Quote Link to comment Share on other sites More sharing options...
mdscorp Posted March 10, 2006 Share Posted March 10, 2006 What year of ES300? If it is 93 model then I can pass on the repair manual procedure. DaveH I am about to do this this weekend, could you please pass th erepair manual to me ? email is luis@mds-corp.com thanks !! Quote Link to comment Share on other sites More sharing options...
Toysrme Posted March 10, 2006 Share Posted March 10, 2006 Hey bud check the stickies. ;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.