underpressure02 Posted March 2, 2005 Share Posted March 2, 2005 My coworker’s outer right rear bulb is out. So I looked at it in the parking lot and I see two coverings on the side of the housing. I pop the coverings off and take the two bolts out. The light does not budge something is holding it on the other side. So I end up ripping out most of the interior on the right rear side of the car to try and get my hand in thinking there is two more bolts. What I found appears to be two plastic push pins almost. But the problem is it is so tight in there you can not easily get a pliers in (not that I had one with me) So I tried to squeeze it with my hand did not work. I did a search and found the following threads. http://us.lexusownersclub.com/forums/index...ht++replacement http://mywebpages.comcast.net/rx300how2/tail_light_lamp.htm http://us.lexusownersclub.com/forums/index...ht++replacement http://us.lexusownersclub.com/forums/index...ht++replacement I was wondering if this is the same procedure for the 2001? I did not try and pry it b/c I was afraid of breaking it and my coworker getting all *BLEEP*ed. Although she was pretty nervous when I was striping out the interior of it. I was freezing my a** off in the parking lot trying to do it yesterday so I gave up and just found this site and these threads. Any help would be great. TIA . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.