greggebhardt Posted October 8, 2004 Share Posted October 8, 2004 On my 2004 LX470 I get a popping noise at the floor pan just under the foot rest on the left side of the floor pan. I think it is a popped rivet at the floorpan where welded to the frame. It only makes this popping noise when I stress the frame in a turn of move onto uneven pavement or anything that torques the frame. Anyone else getting this. I am going to have them look at it at the 15K checkup. Quote Link to comment Share on other sites More sharing options...
jeffreyjumprope Posted October 21, 2004 Share Posted October 21, 2004 Yes, My 04 just started this about a week ago. It has 17000 miles now. I am taking it in for service tommorow. I will update if I find out what it is. Quote Link to comment Share on other sites More sharing options...
greggebhardt Posted October 25, 2004 Author Share Posted October 25, 2004 Yes,My 04 just started this about a week ago. It has 17000 miles now. I am taking it in for service tommorow. I will update if I find out what it is. ← Please let me know. Mine goes in for it 15K service but I have not had alot of luck getting these type things addressed. Seems they want to get the service done and that it. It won't be easy to find. Mine used to only make this noise every once in a while but no almost ALL the time :cries: Quote Link to comment Share on other sites More sharing options...
jeffreyjumprope Posted December 13, 2004 Share Posted December 13, 2004 I forgot to mention it last last check up. I am going in tommorow and will mention it and repost. Quote Link to comment Share on other sites More sharing options...
Ben2u Posted July 2, 2009 Share Posted July 2, 2009 Have the same problem (i think) with a 2005 LX 470. Has anyone heard more on this? I hear a sound (like a poping sound) from under the driver's left foot area when starting to move from a full stop and at low speed turns. The noise almost always is in a set of 2 or 3 pops with about one/two second in between each pop. It is easily reproduced by veering to right/left at low speeds. Thanks! Quote Link to comment Share on other sites More sharing options...
NicLX470 Posted July 2, 2009 Share Posted July 2, 2009 I had the same problem. It was the CV joints that have gone bad. They will creak and pop upon turning or with the suspension moves up or down. But I see your trucks have less miles and are newer than mine. My CV joints went out at 80k miles and the LX470 was 8 years old then. So this is just my own experience for what the "pop" was. Quote Link to comment Share on other sites More sharing options...
Ben2u Posted July 3, 2009 Share Posted July 3, 2009 Thanks for the reply. The car has 36K and has made this noise from the start. As you say it may be too early for CV joints but could be the problem. In th shop for breaks and some other work. They are trying to figure out this problem too ... we'll see. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.