jycbusiness Posted September 27, 2004 Share Posted September 27, 2004 Hi all, I have an 1993 sc300 and I can't find the engine block coolant drian location. Can anyone give me a discription or a picture of the plug location? Thanks in advance. Quote Link to comment Share on other sites More sharing options...
bean_8044 Posted September 27, 2004 Share Posted September 27, 2004 Step 1. Open your radiator cap(once its cool) Step 2. Pull off 1.5" hose on the bottom of the radiator Step 3. Refill radiator after reconnecting hose Quote Link to comment Share on other sites More sharing options...
JRFiero Posted September 28, 2004 Share Posted September 28, 2004 According to the diagram in the shop manual, it's on the passenger side rear, obviously down low. I 'spect you realize that if you just remove the radiator hose, you leave all the coolant below the water pump in the block. And there's a drain !Removed! on the radiator, driver's side rear. Quote Link to comment Share on other sites More sharing options...
bean_8044 Posted September 28, 2004 Share Posted September 28, 2004 Usually i crank it once or twice, but it gets most of it out anyways Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.