moocowman Posted June 4, 2002 Share Posted June 4, 2002 The assembly is held in with clips, no screws. Open the ash tray. Pull hard. You may need to pull one side out at a time. You usually do not need to pry open with anything. But if prying is required, use a cloth to protect any surfaces that may come in contact with the tool in protect from scratching. That's my highly technical contribution. Can anyone beat that? Quote Link to comment Share on other sites More sharing options...
Larry M Posted August 22, 2002 Share Posted August 22, 2002 Hi Thanks for the tip. I would have never, ever figured that out. I am considering installing a satellite radio and looking for a place to put it. Larry Quote Link to comment Share on other sites More sharing options...
Tom_ES300 Posted November 1, 2002 Share Posted November 1, 2002 This has changed on the 200 ES300: The ashtray is now 2 clips on the top corners and 2 screws on the bottom corners. The screws are hidden by the shifter deck. the deck pops out with 4 clips. The ashtray frame can be reused to mount stuff; there's loads of room here. It is not a DIN slot, it's smaller. Tom Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.