Jump to content

Bleeding The Brakes On A 95 Ls400


streetkit

Recommended Posts


as far as i know its the same, but if you want i will check the factory manual when i will get home on sun and i will give you whole procedure.

Link to comment
Share on other sites

  • 2 weeks later...

Basically same as every car---just DON'T let the master cyl run out of fluid. need 2 people; 3 better[unless you have a 'sucker']~~~~~~~that is a MECHANICAL sucker; then you still don't let the fluid run out.

If air gets in the ABS due to fluid run out--it is tough to get out.

Link to comment
Share on other sites

I suspect that there is some air in my system as the brake pedal is pretty soft. Brakes work great but the pedal seems soft and goes a little to low for my taste. Of course I'm comparing it to my SC400 which may not be a good thing to do.

The previous owner had the master cylinder replaced about two or three months before I bought the car. However, it was done by a Pontiac dealer????? :whistles: :o (I guess the service manager was a friend of his)

So I was wondering if they screwed up.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership