pipo8 Posted July 20, 2004 Share Posted July 20, 2004 i've lost the driver side fog lamp and am planning to get a used replacement, but before i do i would like to make sure that i can install it when i get it. the wiring plug behind the lost lamp is still good. without having the lamp physically yet, is it just a matter of plugging in the wiring to the lamp and snap the lamp into place underneath the front bumper? please advise if anyone has any idea. Thanks. Quote Link to comment Share on other sites More sharing options...
Goonz12 Posted July 21, 2004 Share Posted July 21, 2004 I think it is snap in..nothin else..everything in 97-99's are snap ins haroon Quote Link to comment Share on other sites More sharing options...
pipo8 Posted August 3, 2004 Author Share Posted August 3, 2004 fyi. i've bought a new aftermarket foglamp ($123 at rockauto.com) and easily installed onto the bumper within 5 mins. the wire hook-up easily connects to the back of the new lamp and there's a built in screw also on the back side of the lamp that fits thru the hole in the bumper where the lamp is housed. the lamp snaps right into place and i've used the original hex nut to tighten the screw which is easily accessable from underneath the bumper through a protective undersheet. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.