Jump to content

Exhaust


Recommended Posts

  • 2 weeks later...

Hey, not to step on anyones toes, but wouldn't you say that adding a loud exhaust to a quite car seems like a bit of a waste (or contradicion)?

That said, is there any way to modify the exaust (for increased power) with out changing the sound too much?

- Gav

Link to comment
Share on other sites

hey put you location in the profile

sure put 2 exhausts and it will be quieter

or atleast leave the resonator in when changing the pipeing and use a different muffler that is what i did and it didn't make it sound like a rice rocket

nice and deep

Link to comment
Share on other sites

I do not think there is any company out there that nakes a cat back system for your car. You may need to look an uni. muffler system. For that motor you should have a piping size of 2.38ths inches.

Link to comment
Share on other sites

actually the piping size is 2.5

up to the resonator from the cat

then it changes to 2.25 inches from the res to the muffler

greddy does make one if you can find it

What i was saying is that to have piping made in that size. As far as GReddy goes, trust me when i tell you they do not make a system for the ES.... :D

Link to comment
Share on other sites

they do make one

"greddy" is the american version

"trust" is the japanese version

i have seen it on 2 cars only

both in japan

so it isn't for distributution for sale in north america

is there something special with a 2.38 size of piping which isn;t a common size i have never seen as it isnt in a .25 inch increments

later guys

:)

Link to comment
Share on other sites

they do make one

"greddy" is the american version

"trust" is the japanese version

i have seen it on 2 cars only

both in japan

so it isn't for distributution for sale in north america

is there something special with a 2.38 size of piping which isn;t a common size i have never seen as it isnt in a .25 inch increments

later guys

:)

The size is the perfect matched to this engines output. 90% of the exhaust system offered by GReddy/Trust is 60mm, this equles 2.38inces. Only with high horse power vehickes would you need anything larger. You are right about GReddy. GReddy is the US side of TRust Japan. TRust has no listing, nor have they, for an ES 300. Below is a link to the exhsut section of TRust Japan's web site. Hope this information helps.

http://www.trust-power.com/01exhaust/index.html

Link to comment
Share on other sites

yah like i said it would be very hard to get it

it used to be made listed under the mcv 10 chasis

a few years ago

definatly was made though

i guess tehy have an abundance of 2.38ths piping

2.25 is usually used for 4 cyl

6 cyl usually use 2.5 when going a performance route

2.38 i am not sure where to even order that size

bigger is a waste except for a forced induction car

2.5 works fine on every 6 and above cylinder

only person who might notice a difference is someone sitting at a dyno all day

sorry for me not saying more to make sense of the trust situation

but it is kind of a dead duck

later

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership