bubble boy Posted June 17, 2004 Share Posted June 17, 2004 Hello again friends, ok ive waited long enough, the brake light went out on my stock wing and im using that excuse to buy a whole new spoiler. I have decided on the Veilside executive wing. A couple of questions for anyone who knows. Is it a one piece wing? Will i have drill holes in my trunk from the stock wing? If it is a one piece, any known problem with it sratching or rubbing the side of the car, where it hangs down? Who can i order it from in the states? Any info on this part will be appreciated. thanks again, Bubble boy. Quote Link to comment Share on other sites More sharing options...
Omegagavin Posted June 17, 2004 Share Posted June 17, 2004 BB, The wing is one piece and it has holes for screws, though you could use double sided 3M tape for mounting, since it's a flush mount wing. I haven't installed mine yet, but I rested it in position on my trunk and it doesn't appear to have any possibility of rubbing. You will have to move your center Lexus badge down or remove it for the wing to fit properly. You can purchase directly from http://www.sp-power.com/catalog/info.php <img src ="http://www.fototime.com/1486E8680386DF0/orig.jpg"> <img src ="http://www.fototime.com/E50238530D89248/orig.jpg"> Quote Link to comment Share on other sites More sharing options...
Omegagavin Posted June 17, 2004 Share Posted June 17, 2004 Whoops, no HTML here. You can copy and paste those URLs to see my raw unpainted Veilside Exec wing. Quote Link to comment Share on other sites More sharing options...
bubble boy Posted June 17, 2004 Author Share Posted June 17, 2004 Thanks Omega, i saw the pic of your wing, you lucky dog. About the drilling holes, i meant to ask if after installing the new spoiler, will i have holes visible from the stock spoiler? or does the veilside wing cover them. And about the rubbing or scratching, i was thinking about when the trunk is being shut, and mine slams down pretty fast, it seems like the ends might make contact. I relize you dont have yours installed yet so it might be hard to tell. Do you know anything about the WIN Racing spoiler, it is fairly similar to the Veilside. Im still juggling the two of them in my head. Thanks for the link, and the input. You saved me a lot of time. Bubble boy. Quote Link to comment Share on other sites More sharing options...
Omegagavin Posted June 18, 2004 Share Posted June 18, 2004 I do not know much about the Win stuff, and I don't think the Veilside will cover the stock spoiler holes, but I could be wrong. You might ask over at http://www.clublexus.com/ These guys are pretty into modding and know all the details about this stuff. Based on the stock spoilers position I would think the holes might be more toward the front of the car as compared to where the Veilside kit mounts. Good luck. Quote Link to comment Share on other sites More sharing options...
bubble boy Posted June 18, 2004 Author Share Posted June 18, 2004 Thanks again Omega Quote Link to comment Share on other sites More sharing options...
Neo Posted June 19, 2004 Share Posted June 19, 2004 Neither of the two wings mentioned will cover the stock mounting holes. I know the Veilside won't because people have tried. I have the Win Racing and although it is a large piece, it will not cover the holes nearer to the back window. I only know of the DSR wing (stock looking but flushed instead of raised like the stock wing) that will cover the stock holes. It is not quite available yet, but soon. If you go for any other wing, you'll have to fill the stock holes and repaint. Quote Link to comment Share on other sites More sharing options...
tomanji Posted June 20, 2004 Share Posted June 20, 2004 filling and repainting? sounds like a lot of trouble for just a wing, unless your going with a full bodykit, then I can see going through the trouble. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.