Jump to content


96 es300 transmission slips when cold weather


Recommended Posts

Well I've been reading threads about similar problems however I haven't come across transmission "slips" in cold weather only. The performance issue I encounter seems to only occur when the temp is about 40 and below. During summer months it rarely/doesn't occur. At one point, I had read that there is a sensor that, when temps are low, the sensor triggers the transmission to hold gears to a higher rpm to help warm the engine to operating temp. Not sure if this is part of the speed sensor's job or if it's different sensor.

So here's the problem, and I have noted that this happens around reaching operating temp, and after the engine is warm, it won't happen. I'll be driving and the engine will rev like in neutral. It's like the trans disengages and it is not gear or speed dependent. i can be cruising slowly in 2nd or rolling down the highway at 60. The trans drops out of gear then it seems to "search" for the right gear. I have found that letting off the gas and giving the car a chance to "decide" usually works, at slower speeds I will manually shift down to get it to engage.

Any help is appreciated. 

Link to comment
Share on other sites


jefewitt,

The issues you're having are best diagnosed by a good transmission shop, familiar with Toyota transmissions. You may have a bad solenoid, but are you going to pull the tranny pan and change it? Best let the experts correct this one.

Link to comment
Share on other sites

James, great to hear you had the problem fixed, any insight as to how? What was diagnosed as the problem? Who fixed so maybe I could reach out to them?

Thanks

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership