Jump to content

Rx 400H Non-Hybrid Battery Replacement Issue


Recommended Posts

I recently replacement my battery in my RX 400H. I was able to re-set the windows switches
from the driver side. The only problem I
see at the moment is that when I open the driver-side passenger door the
interior light does not come on. All other
doors work. Has anyone run into this problem and been able to fix it? Any suggestions would be great.



Are there any other things I should be looking out since the
battery change that I might be missing??


Link to comment
Share on other sites


Maybe the door switch is broken (the little switch on the pillar near the door latch covered in a rubber boot). Also make sure the dome lights are set to the "door" position.

Link to comment
Share on other sites

  • 4 weeks later...

When I start to unscrew the door switch to remove it the light turns on. But when I
close the door and re-open it after all the interior lights go out, the
light doesn't come back on when I open the drivers passenger door. Is
it the switch or something else any??

Link to comment
Share on other sites

Also check the wiring connection to the switch. It may be loose, resulting in an intermittent connection. Door switches typically last more than 20 years.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership