Tim W Posted January 15, 2012 Share Posted January 15, 2012 Does anyone know how to remove the old wiper blades? The SC430 hood prevents raising the wiper arm up to vertical in order to reach the detention pin on the wiper arm bracket and release the blade. Opening the hood gives some access, but the blade arm seems to move only about 4 inches away from the windshield before it stops. Has anyone performed the wiper replacement? Thank you! Quote Link to comment Share on other sites More sharing options...
dcfish Posted January 15, 2012 Share Posted January 15, 2012 The wiper assembly lifts up for Snow Mode, They won't break, Just lift up following the angle of the windshield. Quote Link to comment Share on other sites More sharing options...
Tim W Posted January 24, 2012 Author Share Posted January 24, 2012 The wiper assembly lifts up for Snow Mode, They won't break, Just lift up following the angle of the windshield. Thanks for the help! Got warm enough today to get the project done without numbing extremities, for a change. Quote Link to comment Share on other sites More sharing options...
ravra Posted November 12, 2015 Share Posted November 12, 2015 Is this the same for the '06 model? I tried pulling and yanking both wipers and they move a bit but the movement is just along the normal sweep so it didn't help. I also checked the manual and didn't see any mention of it. I've replaced just the blades in the past but I wanted to replace the arm as well this time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.