Jump to content

Rx 300 Sun Visor


COMike

Recommended Posts

This may seem like a silly question but our RX driver's side sun visor does not stay up. You push it up into the recess of the ceiling

headliner and it falls down to about a 45 degree angle. Constantly gets in the way of your vision and you almost always hit your head on

it when getting into the vehicle. I have looks and looked at a way to tighten this up all to no avail. Does anyone know of a way to

make this tighter or will I just have to buy a new one?

Anyones help and advice is appreciated

Link to comment
Share on other sites

This may seem like a silly question but our RX driver's side sun visor does not stay up. You push it up into the recess of the ceiling

headliner and it falls down to about a 45 degree angle. Constantly gets in the way of your vision and you almost always hit your head on

it when getting into the vehicle. I have looks and looked at a way to tighten this up all to no avail. Does anyone know of a way to

make this tighter or will I just have to buy a new one?

Anyones help and advice is appreciated

Hi Michael, Sun-visor issue is a common concern amongst Lexus owners. I too have the same problem. Only remedy is to replace with a "new" (strongly against it. Too expensive), or a used one that still stays up.

Roland

Link to comment
Share on other sites

  • 1 month later...

Had the same problem on my rx300, short of replacing you can use a plyer to crimp a section of the visor where the rod goes into it about 2 or 3 inches from the point of insertion. You may have to do this a couple of times.

Link to comment
Share on other sites

  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Forums


News


Membership