ktt Posted February 6, 2008 Share Posted February 6, 2008 Does any one know how to replace the reverse light without taking to the lexus dealer. :whistles: :whistles: Quote Link to comment Share on other sites More sharing options...
CaptnPete Posted February 6, 2008 Share Posted February 6, 2008 Does any one know how to replace the reverse light without taking to the lexus dealer.:whistles::whistles: The inside panel of the rear door has to be removed. I watched the technician do it, but do not recommend it as do-it-yourself item. It only takes a few minutes, but there are snaps and screws to be taken off. Besides you will have to buy the bulbs from Lexus anyway since they are of some special configuration, I have been told. Quote Link to comment Share on other sites More sharing options...
OGY Posted March 13, 2008 Share Posted March 13, 2008 Does any one know how to replace the reverse light without taking to the lexus dealer.:whistles::whistles: You have to take the rear door panel off. First you have to lift your handle and remove the two prongs that hold the handle. (No Screws) Once that is removed, slip a screwdriver to release the tension. (It is like an expandable prong) The only screw is located under the cover for the top strap of the Lexus first aid kit is. Once that is removed, carefully find a place to pull the panel and you should start hearing snap after snap as you pull it away from the door. Tricky part is near the rear window. It snaps towards the window wiper. Once you get started it will all make sense. The reverse bulb will be visible once all this is done. Good luck Quote Link to comment Share on other sites More sharing options...
antlese Posted February 20, 2010 Share Posted February 20, 2010 My first post here. Thanks for the post OGY. I decided to replace the Backup light on my GX470 myself. Your directions were great. I was worried about breaking some plastic because it was cold in my garage when I tried it. Everything went well. Thanks again!! Quote Link to comment Share on other sites More sharing options...
VAPA Posted December 11, 2010 Share Posted December 11, 2010 Thanks again OGY, I followed your instructions and had no problem. Quote Link to comment Share on other sites More sharing options...
TallCowboy0614 Posted September 28, 2016 Share Posted September 28, 2016 Thanks for the "How To" here! I just did it this morning, and instructions were a great help. I was surprised how much dust was behind the door panel though, and inside the door panel. Later I'll look and see where it might be coming from...other than age *LOL* my notes (I have a 2004 GX-470): Where you reference the different direction to unsnap the panel(s) I only saw the need to move "toward the rear wiper" on the top (and if you push it, the side...) panels above and on the side(s) of the window. The whole lower panel came off with the one screw you mentioned (although I had no idea a first-aid kit went there, mine was/is missing), removing the pull handle as you described, and prying the other clips straight forward, away from the door frame. I replaced the whole reverse-light module, mine was cracked, so same process, but in addition, there were only two bolts to remove, and the bulb and housing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.