yoichisoma Posted March 18, 2005 Share Posted March 18, 2005 The ECU brackett bolts are burried behind the CD changer. Do I have to remove it to get to the upper bracket bolts? Perhaps LS400bob can help since he has done it before. thanks yo Quote Link to comment Share on other sites More sharing options...
95LS400Bob Posted March 19, 2005 Share Posted March 19, 2005 I did not have to remove the cd changer. But the bolts are way up there and mostly by feel to get them out. I took out the cruise computer and they gave me more room and I got that top bolt out. Quote Link to comment Share on other sites More sharing options...
yoichisoma Posted March 19, 2005 Author Share Posted March 19, 2005 Thanks 95LS400bob now I am motivated to get back into the cold garage and take that baby out. Yo Quote Link to comment Share on other sites More sharing options...
jzz30 Posted March 19, 2005 Share Posted March 19, 2005 amature... hurry up and take it out :chairshot: Quote Link to comment Share on other sites More sharing options...
Lexls Posted March 20, 2005 Share Posted March 20, 2005 Ummm, how are you going to rebuild the ECU? Quote Link to comment Share on other sites More sharing options...
jzz30 Posted March 21, 2005 Share Posted March 21, 2005 he is sending it to some company in florida to get it reprogramed or something because it stalled out on him once and apparently its a common problem on 95s Quote Link to comment Share on other sites More sharing options...
Lexls Posted March 21, 2005 Share Posted March 21, 2005 I c.... Quote Link to comment Share on other sites More sharing options...
billhinton Posted April 17, 2014 Share Posted April 17, 2014 I'm replacing caps in LS400 ECU and down to the last (upper) braket on the ECU. Is it held by one bolt? Ten MM?. Can I get to it with a socket? Quote Link to comment Share on other sites More sharing options...
billhinton Posted April 17, 2014 Share Posted April 17, 2014 Make that a '95 Quote Link to comment Share on other sites More sharing options...
landar Posted April 17, 2014 Share Posted April 17, 2014 Bill, it looks like there are about 3 nuts holding the ECU to several brackets. I have heard that the nuts are 12mm but my experience with Lexus shows them to love 10mm. In any case, get a good light in there and you should be able to see how to proceed. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.