Jump to content


h8snow

Regular Member
  • Posts

    6
  • Joined

  • Last visited

Everything posted by h8snow

  1. Thank you much for the info. The seal i am looking for is an adhesive backed foam strip that was glued to radiator support it closed off the gap between this support and top of radiator. Would really like to replace it as the original came apart. Sorry about profile the car is a 1998 ES300.
  2. Trying to find the part number for foam seal that goes between top of radiator and radiator support. Checked with dealer no luck also could not find it searching on line. 1998 ES300 thanks for any help. :)
  3. Capn thank you much. Removed ash tray following your instructions worked perfect found a business card stuck in back. Transmission level is good drained out @3.5 quarts last oil change put that amount back just wanted to make sure. Great forum thanks again. :)
  4. My first post been getting lots of help with my 98 ES300 70000 miles. Bought the car last December paid way way to much have been restoring it since. Has anybody had there ash tray stick shut just will not open when i push on it. I dont smoke nothing in it to cause a jam just aggravating. Also is the transmission fluid checked while engine is running, in gear , engine stopped or with someone under hood while moving. Thanks much for any help.
  5. Thanks all for replying. Guess i will take a look under the dash and see if there is an empty connector for the drl relay. Just was not sure if the export model has a different wiring harness in 1998. The winter tires i am using are Michelin x-ice 205-65-15s. Thanks again.
  6. Could someone if 1998s were wired for DRLs. I checked Alldata looks like maybe just need the relay. Really would like this feature on mine. Thanks for any help.
×
×
  • Create New...

Forums


News


Membership