Jump to content


Grampa-2007

Regular Member
  • Posts

    1
  • Joined

  • Last visited

Profile Information

  • Gender
    Male
  • Lexus Model
    RX330

Grampa-2007's Achievements

Member

Member (1/14)

  • First Post
  • Week One Done
  • One Month Later
  • One Year In

Recent Badges

0

Reputation

  1. 1) Remove rear tool tray( NAV DVD player is underneath) a)fold down rear seats b)find velcro tabs on each side of rear tray cover where it meets back seats c)lift velcro tabs d)slide fingers gently along edge where rear cover meets rear seats to release 5 plastic push pins. e)Use 12mm socket to remove the 2 now visible hinge bolts f)remove tool tray cover g) remove tool tray, There are 2 black push pin on both sides that pry up easily. NAV DVD player should now be visible on passenger side 2) Put ignition in ACC position 3) If there is a dust cover on unit remove it. Mine did not have this. Some do. 4) There should be a "slide type button" on your left of the unit. Slide this button to your left(facing unit). DVD should eject 5) Insert new DVD 6) Slide button back to original position 7) allow NAV to update before turning off ignition( check NAV Screen) 8) Reassemble in reverse order. Hope this helps. I just replaced mine in a 2008 RX. It may sound like a lot , but I was finished in 15 minutes. Tip: If you are uncomfortable with DIYs, take your time and think it through. Thanks Claude, mine's an 08 RX too so it should be a snap. Tried the above but, how do you get the DVD out? Slid the slide button to the left and the DVD did not eject. Thanks for any help in this matter.
×
×
  • Create New...

Forums


News


Membership