The client had contacted me and sent me a few pictures. I told him I had hoped that the car could be corrected via a one-step polish.
The client arrived early in the AM. After a QEW wash and clay. The "shop of hacks" where supposed to clay the car, but I did find quite a bit of bonded contaminant on the rear of the car, leading me to believe that the car was never clayed.
I did a straight IPA wipe down on the paint to ensure a smooth polishing process and remove any fillers/glazes that might of been used.
Here are some pictures:








I first tried:
M205 via KBM flat black classic LC PCXP6
This combo removed the holograms and wool induced marring, but there where some deeper RIDS that where hidden under the work left by the "shop of hacks."
Client elected to go with full correction.
Here is a 50/50 of the door after:
M105 via KBM flat orange classic LC PCXP6
M205 via KBM flat black classic LC PCXP6













