Help - Search - Members - Calendar
Full Version: Sc400 Not Firing
Lexus Owners Club (USA & Canada) > Lexus Owners Club > Lexus SC300 / Lexus SC400 / Lexus SC430 Forums > 92 - 00 Lexus SC300 / SC400
Redtallman
Hello guys have a problem thats stumping me pretty bad. first went to my local pull a part an found a 93 sc400 just like mines so i was pretty happy,then when i stop at the gas station she didnt start up....okay check fuses all good,listen for the fuel pump no sound at all got my starter fluid she fired right up so no fuel!!!!!!okay tow car home change out the fuel pump ecu,,(had tested the pump earlier it worked so on to the ecu right).but now im getting no spark at the coil,i did get it to run like on six different occasion and ran fine but its interminent. or off an on .i tested wire going to spark coil an its getting 12volts with ignition on,tried to pull codes via diagnostic port but its just give me a continues flash. now my trunk release buttons is not working either,could it be the oem keyless enrtry brain in the door cause a no spark condition????let me be clear now the starter is working,timing belt is not broken,fuel pump does prime ,just not firing,oh yeah ,i do have voltage at the ignitor wires...but if 1 is bad wouldnt the other 1 still fire the other 4 cylinders????

any ideas appreciated as u can see ive been killing the search button


Redtallman
Redtallman
QUOTE (Redtallman @ Oct 29 2009, 12:49 AM) *
Hello guys have a problem thats stumping me pretty bad. first went to my local pull a part an found a 93 sc400 just like mines so i was pretty happy,then when i stop at the gas station she didnt start up....okay check fuses all good,listen for the fuel pump no sound at all got my starter fluid she fired right up so no fuel!!!!!!okay tow car home change out the fuel pump ecu,,(had tested the pump earlier it worked so on to the ecu right).but now im getting no spark at the coil,i did get it to run like on six different occasion and ran fine but its interminent. or off an on .i tested wire going to spark coil an its getting 12volts with ignition on,tried to pull codes via diagnostic port but its just give me a continues flash. now my trunk release buttons is not working either,could it be the oem keyless enrtry brain in the door cause a no spark condition????let me be clear now the starter is working,timing belt is not broken,fuel pump does prime ,just not firing,oh yeah ,i do have voltage at the ignitor wires...but if 1 is bad wouldnt the other 1 still fire the other 4 cylinders????

any ideas appreciated as u can see ive been killing the search button


Redtallman



ok it was the main ecu




u can kill this thread
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2009 Invision Power Services, Inc.