Fuel filter is located in front of the drivers side rear wheel.

Remove splash guard:

Loosen the fuel filter bracket (the 2 nuts that secures the bracket to the vehicle), then use 2 box wrenches to loosen both filter like so (repeat on the other side):



You should have a bucket around to catch the dripping fuel while you're doing this.

I wrapped the fuel line just to slow down the fuel drip.

Install new filter and tighten bracket, install splash guard.


After installation of your new fuel filter, it is going to be slightly harder to start the car because the new filter is still dry. Don't worry, your vehicle should start up easily once the filter is saturated with fuel again.

If you have any questions, please don't hesitate to email me.

canu post some mor pics... thanks...

I WAS TOLD THAT YOU NEED A SPECIAL TOOL TO REMOVE THE FUEL FILTER ON A 95 SC300 2JZ-GE
IS THIS TRUE?
IS IT REALLY THAT MUCH OF A PAIN IN THE ASS?