 Replacing Tail Light Bulb |
|
|
  |
 May 28 2009, 08:29 AM
Post
#1
|
|
|
New Club Member  Group: Regular Member Posts: 8 Joined: 3-February 08 Member No.: 63,787 Car Model:gx470 & gs350 Location:NH  |
Can anyone provide any help with instructions on replacing the tail light bulbs in my 2004 GX470?
Thanks |
 |
 
|
 May 29 2009, 02:23 AM
Post
#2
|
|
 Advanced Club Member Group: Regular Member Posts: 257 Joined: 20-November 05 From: houston Member No.: 21,708 Car Model:LS400- 1994 / GX470-2004 / LS460 - 2007 Location:HOUSTON |
Replacing Tail light bulb is quite easy. Once you open the rear door. You need to remove the 2 bolts and then the release the claw. This claw is located on the outer sides of the car body. Take a (-) screwdriver, tape the edge of the screw driver, and insert into the gap and have someone pull it out. Dont twist and turn the assy,just pull the lamp assy towards yourself, the claws will release the lamp assy. Now disconnect the connector and now twist the bulb holders and replace the bulbs and insert the assy the reverse of what you have done. Now the most difficult part will be to remove the Lamp assy of the RH side as the cargo door has got a bit of obstruction, you need to keep the door open is an angle to do this job. Cheers
|
|
|
|
 Jun 1 2009, 10:41 AM
Post
#3
|
|
|
New Club Member Group: Regular Member Posts: 8 Joined: 3-February 08 Member No.: 63,787 Car Model:gx470 & gs350 Location:NH |
QUOTE (mann777 @ May 29 2009, 03:23 AM)  Replacing Tail light bulb is quite easy. Once you open the rear door. You need to remove the 2 bolts and then the release the claw. This claw is located on the outer sides of the car body. Take a (-) screwdriver, tape the edge of the screw driver, and insert into the gap and have someone pull it out. Dont twist and turn the assy,just pull the lamp assy towards yourself, the claws will release the lamp assy. Now disconnect the connector and now twist the bulb holders and replace the bulbs and insert the assy the reverse of what you have done. Now the most difficult part will be to remove the Lamp assy of the RH side as the cargo door has got a bit of obstruction, you need to keep the door open is an angle to do this job. Cheers Thank you, everything worked according to plan. |
|
|
|
|
Jun 1 2009, 12:39 PM
Post
#4
|
|
|
Advanced Club Member Group: Regular Member Posts: 257 Joined: 20-November 05 From: houston Member No.: 21,708 Car Model:LS400- 1994 / GX470-2004 / LS460 - 2007 Location:HOUSTON |
QUOTE (muz @ Jun 1 2009, 10:41 AM) [Thank you, everything worked according to plan. No probs, you are welcome. 
|
|
|
|
|
|
Lo-Fi Version | Time is now: 21st November 2009 - 02:24 AM |